3D Tools


		Top Headlines InnoMedia moves location - check the contact page for the new details InnoMedia signs to act as a UK reseller for Astro design test and measurement devices InnoMedia sells 10 DSC charts to the BBC for their 3D studio and EastEnders as it goes HD Plura broadcast monitors - high performance, cost effective LCD’s from 7” to 70” Marvin - r3d, Alexa, SI2K, Phantom HD OnSet automated data asset management and archival system launches Rorke Data buttons up SAN and enterprise storage for file based video Cine-tal’s grade 1, 10 bit monitors and video processing modules continue to set standards




		3D tools from InnoMedia

On this page, we bring together the 3D tools available from a variety of vendors that will help you make the best possible images.

The Fairburn 3D Camera chart from DSC Labs for setting up your 3D rig and maintaining optimum match between L and R
The Astro SM 3324 24” 3D monitor - circular polarisation; either dual HD-SDI inputs for separate L/R or an internal decoder for side by side, over/under or sequential line matrixed feeds
The Astro WM-3209 8” onboard waveform/vectorscope with a multitude of 3D analysis tools
The Astro HR-7502 uncompressed SSD video recorder- capable of recording 2 x 4:2:2 HD-SDI stereo data streams
The Cine-tal Davio processing box, with calibration, LUT management and 3D encode/decode library functions
The Cine-tal Dolby processor for viewing 3D images in a screening room via a Dolby colour wheel enabled projector


	SHOOT 3D...


	Use the Fairburn 3D chart to set up your rig, and the Astro WM-3209 on-camera monitor and waveform to check and maintain your images whilst you shoot. Click the individual images for more information


	RECORD 3D...

The Astro HR-7502 uncompressed Solid State video recorder has two HD-SDI inputs for recording 3G, Dual link 4:4:4 or 2 x HD-SDI Left/Right 4:2:2 video streams simultaneously.

Click the image for more details of this cost effective solution for recording ArriRaw and other uncompressed video formats.


	VIEW 3D...


	The Astro SM-3324 (left) is a 1920 x 1200 3D monitor, using circular polarisation for separating the L/R eyes. It has two HD-SDI inputs, for separate L/R feeds, or it can accept multiplexed inputs in side by side, over/under or line sequential formats. With several useful tools and options for checking 3D (cursors, zoom, L/R up/dowm phase offset) it is equally as useful in a studio or on-set as in a post production environment. Again, click the images for more details.

For processing images prior to display, look no further than Cie-tals highly capable video processing boxes, the Davio (left) and the Dolby processor (above). Running the Davio with the 3D library allows the combining of separate L or R eye, with separate 3D LUTs for each channel (if necessary) to correct for any colour differences (map these using the Fairburn chart!) and a downstream 1D LUT for display calibration. Out puts can be in any of the popular 3D delivery formats, either over HD-SDI or 10 bit HDMI.

For Dolby projection systems, the processor box takes separate HD-SDI feeds and applies Dolby’s colour correction matrix to make the HD-SDI output pair suitable for feeding to a projector fitted with a Dolby display colour wheel system, without the need for a Dolby Showtime server.


	[Home] [About] [Products] [News] [FAQ] [Contact] [Calibration] [3D Tools]